High Pressure Slip Casting System (HPSC or HPC)

High Pressure Slip Casting System High pressure slip casting (HPSC or HPC) HPC is a high-performance mass production system used to produce ceramic parts cost-efficiently with high density, strength, and dimensional accuracy. HPC systems are designed in case to produce sanitary ware, tableware and technical ceramics using high-pressure injection of clay slip (porcelain, stoneware, bone […]

RAM Press – Get even better results with Porous Resin

 What is RAM Press  Did you already know that porous resin is as well used for RAM Press process? With just the right know-how, porous resin molds are able to replace traditional plaster molds therefore being more accurate and more permanent. A porous resin mold ensures a long mold life and a high level of […]

High Pressure Casting 101 – The casting process for Sanitary Ware

High Pressure Casting High Pressure Casting Process for Sanitary Ware The casting process varies depending on the slip being used and the article being cast. In general, the following applies for casting of sanitary ware articles using High Pressure Casting technology. Casting Process An already prepared Castimo Porous Resin is pre-filled with liquid clay body […]

Traditional Slip Casting vs. High Pressure Casting

While Traditional Slip Casting is still the most common technique used for commercially produced pottery.It bears various disadvantages compared to High Pressure Casting: Gypsum molds have a low toughness, can fracture easily and wear out quickly because the pores are eroded from the water that goes through them A large inventory of gypsum molds needs […]

Slip Casting – Put on the Pressure

Slip casting is a forming technique for ceramics. A liquid clay body slip (porcelain, stoneware, bone china, vitreous china (VC), fine fire clay (FCC)), the so-called slip, is poured into an absorbent mold, which allows to form a layer of solid clay (the cast) on the inside wall of the mold. Traditional Slip Casting Traditional […]